TRADITIONAL
From screed needing to cure in 8 hours, to severe cambers only leaving 10mm thickness , the below products can help - Get in touch!
Traditional screed is a sand & cement screed mixed at 4:1 ratio with fibres. We use 100% quality cement to give floors the best finish and most strength possible. One benefit of traditional screed is that it can be laid to falls. Our experienced team at ATF understand the importance of mixing the screed correctly. All our Pump operators are trained and competent. We have a large fleet of next generation pumps which are regularly serviced and checked. This helps to prevent any issues on site, allowing our teams to be constantly laying. All of our screeds are installed in line with the British Standards BS8204.
FLOWING
Eco: Gyvlons, versatile, robust, environmentally friendly screed, with bay say sizes of up to 800m2 and productivity up to 2000m2 per day. Depths of 35mm Floating (domestic). 40mm (commercial)
Thermio +: The Guaranteed ultra-efficient screed for under-floor heating, with a higher guaranteed thermal conductivity and just 20mm coverage to pipes required. 300m2 Bays with Underfloor heating.
Eco FD: Gyvlon’s Faster Drying screed with early floor covering properties. All the benefits of Gyvlon Eco with added benefits of drying twice as quickly with the product not producing a Laitance.
Eco FD: Gyvlon’s Faster Drying screed with early floor covering properties. Designed to be bonded from as little as 8mm for a thin levelling screed.
Finio: The Ultra Thin Unbonded and acoustic solution. Unbonded over polythene at just 20mm depth and 25mm over Acoustic matting
Greener, Thinner, Faster All the Gyvlon Screed Range have a high recycled content with the Binder being 98% Recycled. Meaning that these products offer a significant saving on Co2 Against other screed options. Products can be laid thinner than other traditional and flowing screeds on the market and is quicker to install due to its pumping capabilities.
Cemfloor is a BBA Approved, high performance cement based, free flowing, self-compacting liquid screed and is suitable for a variety of applications. Cemfloor provides all the advantages normally associated with liquid screeds. The most obvious is that Cemfloor can be installed at least ten times as fast as traditional screeds – over 2000m² has been installed in a day. Generally, Cemfloor is installed at thinner sections and so saves weight and provides the opportunity to improve thermal performance of the building by using thicker insulation. Cemfloor works extremely well with underfloor heating where a combination of the thinner section, much higher thermal conductivity value and the fact that Cemfloor completely wraps and encapsulates the pipes ensures vastly superior efficiency and response from the heating system. In addition to these benefits Cemfloor provides quicker drying than other liquid screeds and, more importantly, Cemfloor is more tolerant of the often poor drying conditions on sites. This and the fact that there is no laitance to be removed from the surface makes the task of applying vinyl or other surface finishes easier and safer. Cemfloor has enjoyed enormous growth in UK in the past 5 years since its launch and has gained approximately 15% of the screed market in this short time. With the benefits it brings and the reputation that it has already gained, this is perhaps no great surprise.
Coming Soon
The Flowing screed service we provide is quick and efficient with an outstanding finish. We pour all types of domestic and commercial projects. We provide an excellent preparation service to make sure the flow screed is finished to the highest standard. Flow screed has a few key benefits, Flow screed can be laid to a minimum of 40mm. Mass areas can also be completed 1000m2 plus a day (area dependent) ATF have dedicated flow screed teams to work alongside our BREMATS (Mobile Screed Factory) We work together to ensure the best product is used for the project. Having full control of the supply allows us to minimize any downtime and complete jobs as quickly as possible. Visit the BREMAT page to discover how screed quality is controlled.
Acoustics
Acoustic flooring is designed to insulate impact noise, preventing its transmission from your floor into the spaces below. ATF are accredited installers on many products and understand the requirements depending on the different robust details. Working alongside the developer or builder to ensure the correct and most efficient product is used and installed to the highest standard. Our contracts managers and site supervisors are constantly inspecting work and arranging meetings with different reps. Ensuring we are always updated on any changes within the install procedure.
Insulation
To achieve a successful screed the preparation work is key. Our insulation teams at ATF are trained on the importance of installing insulation correctly. In the average home 10% of heat loss is through the ground floor. The Building regulations require floors to achieve a minimum U-Value (The rate at which heat will travel through the floor). ATF are more than happy to assist with these calculations when pricing a tender. Alongside the insulation there is usually a requirement for a DPM (Damp Proof Membrane) and a VCL (Vapour control layer). The DPM usually sits underneath the insulation board, which is taped and sealed to prevent any moisture entering the floor. The VCL layer is used to prevent water vapour from diffusing into the floor during the cold months.
APPROVED BY
About Our Company
ATF Screeds are a family run business with over 50 years combined experience in the construction industry.
We are one of the fastest growing screeding contractors in the midlands and pride ourselves in having built a reputable company, working with some of the industry leading main contractors and developers. Our growing portfolio has seen us successfully undertake and complete projects for the following companies.
Customer Testimonials
I have worked with ATF on a number of projects now and always found ATF to be very hands on in their approach to delivering a professional and quality install.Their operatives are of a high quality and take pride in their work. I would have no hesitation in using ATF on my future projects.
Morgan Sindall have been working with ATF Screeds since 2018 and have now completed 19 projects for the Midlands business. We constantly receive quality service with good site management and their health and safety record is exemplary. This was rewarded with their supply chain promotion to “preferred status” in March 2022.
ATF carried out screeding works for me on our new care home, I found them to be a very professional company that met are requirements to a high standard I would happily use them again on any future projects.
ATF Screeds are a professional and reliable screeding contractor, they have conducted a few large schemes for me ranging from circa £100-160k, all conducted to a high quality and on programme.
OUR CLIENTS
Latest Projects
West Bar, Bowmer & Kirkland
ATF Screeds are currently onsite installing Bonded Isocrete Heavy Duty K screed. This project is being installed to SR1.
Latest Projects
Mansfield Brewery, Keon Homes
ATF Screeds are onsite installing 6mm Isorubber and Gyvlon Eco using our BREMAT S4.15
NEWS
10. July 2023
ATF Screeds are installing 75mm self-compacting concrete, our first visit went well with 49m3 complete just after 1pm. We used a 24-meter Boom pump to speed up the process.
10. July 2023
ATF Screeds have secured the Screed package at Coundon Court School for Wates Group at Coundon Court School. We will begin works in august on just over 6000m2 of Isocrete K screed.
16. May 2023
Anyone involved in the screeding industry will understand pumping 70 meters vertical to high areas isn’t easy and full of added risk, especially for health and safety reasons. It took 19m3 of Gyvlon Eco to screed 3 luxury penthouses.